May 6, 2019

XL-Saw and Websaw 1300 Z-Axis ACME screw requires daily cleaning with wire brush, and liberal use of Lithium Grease only. Failure to properly lubricate screw can strip brass nut.

Note: DO NOT USE WD40, it can cause Acme Nut to come loose in housing.

November 14, 2018

XL - Saw only: Check upper and lower idle rollers for lateral play after every shift. Also check that fence bearings move freely, can cause board drag. Monitor and replace bearings as needed (standard R12 bearing). Never increase air pressure above 65psi, it can cause...

July 26, 2017

Please use the attached instructions for relocating your XL-Saw.


January 26, 2017

Please note that bypassing any type of security lock is strongly inadvisable and highly dangerous.  When experiencing a malfunctioning lock, please repair or replace immediately! For old style Euchner locks (the black square) please see our rebuild...

June 2, 2015

Neglecting your computer can result in costly repairs and down time. Clean Your computer regularly.

The average computer and PMAC with urgent shipping is roughly $5400-$6700.




June 1, 2015

Don't let your REA print head run out of ink! It can cause downtime and costly repairs. 

Allowing your print head to "suck air" causes the residual ink inside to dry and clog the delicate jets. Keep your print head with a steady supply of ink. Call REA Jet 440-232-0555...

Please reload

Featured Posts

Idle Bearings in Upper Rollers & Fences

November 14, 2018

Please reload

Recent Posts

July 26, 2017

March 15, 2016

February 8, 2016

October 15, 2015

Please reload

Please reload

Follow Us
  • Facebook Basic Square
  • Google+ Basic Square