SERVICEBULLETINS

May 6, 2019

XL-Saw and Websaw 1300 Z-Axis ACME screw requires daily cleaning with wire brush, and liberal use of Lithium Grease only. Failure to properly lubricate screw can strip brass nut.

Note: DO NOT USE WD40, it can cause Acme Nut to come loose in housing.

December 13, 2018

Avoid costly REA print head repairs with a stainless steel guard to protect your investment! Click here to order now.

July 26, 2017

Please use the attached instructions for relocating your XL-Saw.

CLICK HERE TO DOWNLOAD PDF

May 18, 2017

Even the tiniest of cracks in conduit can let saw dust impact inside conduit. Between that and the twisting stress point on your wires can cause machine failure or even short your system. Replace damaged conduit as soon as possible. We suggest 3/4" metallic liquid tigh...

February 17, 2017

In the next 30 days you will no longer be able to purchase SF Series AC Techs. You may place orders now to stock up on spare units. We currently have some on the shelf. They are first come first serve. Alternatively, we have a replacement unit that will wire directly i...

January 26, 2017

Please note that bypassing any type of security lock is strongly inadvisable and highly dangerous.  When experiencing a malfunctioning lock, please repair or replace immediately! For old style Euchner locks (the black square) please see our rebuild...

March 15, 2016

Be sure to check your motor mounts during your daily cleaning. Fatigue can occur at the high stress points of the mount. Catching a break early can safe you costly down time.

 

 

September 18, 2015

We now offer a "Pivot Pin Clip" using a standard bolt and this stainless steel clip. In the event your pins get damaged or lost, this is the easier replacement option. Call today to order!

 

 

 

September 10, 2015

 

Minimize costly down time by recognizing when your carriage cylinder is at the end of its life. If you notice your carriage damper is continually blowing air, it means your seals inside the carriage cylinder are almost gone. Consider replacing your seals. We recommend...

Please reload

Featured Posts

Idle Bearings in Upper Rollers & Fences

November 14, 2018

1/2
Please reload

Recent Posts

July 26, 2017

March 15, 2016

February 8, 2016

October 15, 2015

Please reload

Archive
Please reload

Follow Us
  • Facebook Basic Square
  • Google+ Basic Square