BLOG

May 6, 2019

XL-Saw and Websaw 1300 Z-Axis ACME screw requires daily cleaning with wire brush, and liberal use of Lithium Grease only. Failure to properly lubricate screw can strip brass nut.

Note: DO NOT USE WD40, it can cause Acme Nut to come loose in housing.

December 13, 2018

Avoid costly REA print head repairs with a stainless steel guard to protect your investment! Click here to order now.

November 14, 2018

XL - Saw only: Check upper and lower idle rollers for lateral play after every shift. Also check that fence bearings move freely, can cause board drag. Monitor and replace bearings as needed (standard R12 bearing). Never increase air pressure above 65psi, it can cause...

July 26, 2017

Please use the attached instructions for relocating your XL-Saw.

CLICK HERE TO DOWNLOAD PDF

May 18, 2017

Even the tiniest of cracks in conduit can let saw dust impact inside conduit. Between that and the twisting stress point on your wires can cause machine failure or even short your system. Replace damaged conduit as soon as possible. We suggest 3/4" metallic liquid tigh...

February 17, 2017

In the next 30 days you will no longer be able to purchase SF Series AC Techs. You may place orders now to stock up on spare units. We currently have some on the shelf. They are first come first serve. Alternatively, we have a replacement unit that will wire directly i...

January 26, 2017

Please note that bypassing any type of security lock is strongly inadvisable and highly dangerous.  When experiencing a malfunctioning lock, please repair or replace immediately! For old style Euchner locks (the black square) please see our rebuild...

March 15, 2016

Be sure to check your motor mounts during your daily cleaning. Fatigue can occur at the high stress points of the mount. Catching a break early can safe you costly down time.

 

 

October 15, 2015

The biggest problem that I have found with the older PCI PMAC cards is that the card can crack along the buss tab. This kind of thing is not repairable. This is caused by the end of the card not being properly supported, and the saw head is banging up and down because...

Please reload

Featured Posts

Idle Bearings in Upper Rollers & Fences

November 14, 2018

1/2
Please reload

Recent Posts

July 26, 2017

March 15, 2016

February 8, 2016

October 15, 2015

Please reload

Search By Tags
Please reload

Follow Us
  • Facebook Classic
  • Twitter Classic
  • Google Classic