YOU COULD BE UNDERUTILIZING YOUR TCT WEBSAW

SAW IS IN POOR REPAIR
Many factors can slow the operation of a saw that has been in operation for years,slow computer,worn feed rollers, broken or soft table springs,leaky pnuematics, damaged carriage bearings. A three day service visit can help restore your saw back to its original running condition.

INFEED PRINTER UPGRADE
(Click for More Info)
Printer issues can slow the saw operation as well as the men at the assembly table The infeed printer upgrade utilizes your existing printer hardware, but places it on the infeed (outside the saw cabinet)This allows the saw to print on even the smallest pieces.

XL-CUT SOFTWARE
(Click for More Info)
XL-Cut software will run on any TCT saw 1050-1200c It utilizes the very latest optimization and allows you to cut truss by truss with the absolute minimum of waste. XL-Cut has been proven to increase production by 30-40% Cutting truss by truss can net 300 to 400 pieces per hour

XL-FEED LIVE DECK
(Click for More Info)
XL-Feed live deck is TCT's next generation of autofeeder It is designed to provide a continuous flow of lumber into the saw by homing the next piece of lumber stock before the backside cuts are completed. This feeder will allow you to cut an additional 400 pieces per shift and can easily be retro-fitted to existing TCT autofeeders

(Pictures Indicate Pieces Cut Per Hour)

CUT AN EXTRA 7,000 PIECES PER WEEK! AND SAVE $6,500.00 PER MONTH

	SAW IS IN POOR REPAIR Many factors can slow the operation of a saw that has been in operation for years,slow computer,worn feed rollers, broken or soft table springs,leaky pnuematics, damaged carriage bearings. A three day service visit can help restore your saw back to its original running condition.
	INFEED PRINTER UPGRADE (Click for More Info) Printer issues can slow the saw operation as well as the men at the assembly table The infeed printer upgrade utilizes your existing printer hardware, but places it on the infeed (outside the saw cabinet)This allows the saw to print on even the smallest pieces.
	XL-CUT SOFTWARE (Click for More Info) XL-Cut software will run on any TCT saw 1050-1200c It utilizes the very latest optimization and allows you to cut truss by truss with the absolute minimum of waste. XL-Cut has been proven to increase production by 30-40% Cutting truss by truss can net 300 to 400 pieces per hour
	XL-FEED LIVE DECK (Click for More Info) XL-Feed live deck is TCT's next generation of autofeeder It is designed to provide a continuous flow of lumber into the saw by homing the next piece of lumber stock before the backside cuts are completed. This feeder will allow you to cut an additional 400 pieces per shift and can easily be retro-fitted to existing TCT autofeeders	(Pictures Indicate Pieces Cut Per Hour)